Quick Answer: How Do I Know What Tires To Get For My Rims?

Are all 4 bolt rims the same?

Not all 4 stud wheels are the same Pitch Circle Diameter (PCD) although a 100 PCD is most common.

Use this wheel suppliers site and key in each of the two cars and you’ll that Acura wheels should mount on the Rio..

Where is rim size located?

It is usually located on the back of a spoke along with the factory numbers, or engraved into the inside of the barrel. The dimensions will always be written as something like 20X8. 5J indicating that the wheel is 20” by 8.5”, the width being 8.5”.

Does Tire Rack sell rims?

Tire Rack has many rims and tires for trucks. Check out some of my favorite truck rims and tires to go with them.

Can I use 235 55r17 instead of 225 65r17?

Yes. For safety reasons be sure that the replacement tires are rated for both load and speed at or above the specifications for your Vehicle. Be sure to replace the tires in pairs on either the front or rear axles. Failure to do so could cause problems.

How do you know what tires to get?

The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.

How do I find out what brand my rims are?

How to Identify an Alloy Wheel BrandInspect the wheel cap. The cap is the part that covers the car’s hub where it comes through the center of the wheel. … Inspect the rim of the wheel. … Turn the wheel over so that the back can be inspected. … Look for a logo or the name of a wheel manufacturer imprinted on the back of the wheel.

Can I use 235 tires instead of 225?

Obviously, you will need a certain kind of tire depending on how you use your vehicle. Due to this, a 235 tire might not be better than a 225 tire, or vice versa, but depending on your situation, one tire might serve you better than the other.

Can you put any width tires on same rim?

Wheels and tires are not interchangeable words. Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size.

How do you know what size tire to get for your rims?

Multiply the width in inches by 25.4 (the number of millimeters per inch). This calculation gives you the first number in the tire size. Typically, you can add up to 10 millimeters to the width. So if you had an 8.5-inch rim, the section width range you can safely use is between 215 and 225.

Can I use 235 65r17 instead of 225 65r17?

You could, and the 225/65R17 tire will fit your existing rims, but you don’t want to do so. The lesser 225mm width tire offer a narrower tread contact patch, as well as potentially a lesser load carrying capability, depending on model of tire.

Can I use 225 65r17 instead of 235 60r17?

Both fit 17 inch rims, so one obstacle is out of the way. 235/65R17 has a sidewall height of 153 millimeters (65% of 235 mm), while 225/60R17 has a sidewall height of 135 mm (60% of 225 mm). … You are reducing sidewall height by 18 mm (about 3/4″), so your car will be lower by this amount.