- What does a Thumpr Cam do?
- What makes a cam lumpy?
- What is considered a mild cam?
- How much horsepower does a tune add?
- Is a ghost cam tune bad for engine?
- Can you put a cam in a stock engine?
- How do I find my Comp camshaft?
- Does a cam add horsepower?
- Whats better ls1 or ls2?
- How much horsepower do headers add?
- Does a cam make a car louder?
- How much HP does a cam add to ls1?
- What is a good cam for a stock 350?
- How much HP can a ls1 make?
- How big of a cam can I put in a stock 350 vortec?
What does a Thumpr Cam do?
A Thumpr cam, however, is designed to provide the full-throated sound of a race cam with be perfect for gearheads who want their cars to sound as good as they run — everywhere.
That means they can have a lumpy, intimidating idle and still drive the car to work every day..
What makes a cam lumpy?
what makes the cam have that lumpy sound? The overlap of the exhaust valve closing and intake valve opening causes the engine to be inefficient at low speed which results in the lumpy idle. The closer the Lobe Seperation Angle the more the overlap, the more duration the more (typically) the overlap.
What is considered a mild cam?
A mild cam is usually a little bigger than the stock cam. Most of the “Mild” cams have just a bit of lope to them and will give you a bit more power than the stocker. My car, unfortunately, has a mild cam in it with it’s TR224. Still makes more power than stock but idles and rides real close to stock.
How much horsepower does a tune add?
If you have installed a lot of performance parts like cold air intake, exhaust and turbo – then tuning your car will definitely gain you a lot of horsepower. To give a ballpark figure – if you are on a stock car, you could probably gain 10-15 horsepower from a dyno tune.
Is a ghost cam tune bad for engine?
There’s nothing wrong with a ghost cam tune, plenty of people running it with no problems. Unless you’re auto, then it’s probably not a good idea due to the effect it has on drivability.
Can you put a cam in a stock engine?
Registered. You can’t swap just the cam and nothing else. Not counting the fact that sticking in a big cam in a stock engine and it running worse due to a mismatch with cylinder head and intake airflow, at the very least you MUST swap the springs.
How do I find my Comp camshaft?
COMP Cams uses two-number designations for all its engine families. The LS engine is designated 54 and this number is generally the first two numbers that define the actual cam part number. Other examples include small block Chevys -12, big block Chevys -11, and 5.0L small block Fords -35.
Does a cam add horsepower?
Performance cams increase the duration and timing of the valve openings during the engine stroke, increasing horsepower and making your car accelerate more quickly. You’ll idle slightly rougher with a performance cam, but get a throaty rumble that’s desirable for some gearheads, depending on your vehicle.
Whats better ls1 or ls2?
One of the main differences between the LS1 and the LS2 is in the intake manifold. The LS2 intake is slightly better than the LS1 intake. … The LS1 intake is designed for a 5.7L and flows enough air to keep a 350+ horsepower 5.7L happy. The later model LS1 came with an LS2 intake, which improved horsepower.
How much horsepower do headers add?
10-20 horsepowerIn general, a quality set of headers should provide an increase of approximately 10-20 horsepower, and if you’re restrained with your right foot, you may even see an increase in fuel mileage.
Does a cam make a car louder?
A cam can make an engine louder. I’ve done extensive testing in an anechoic chamber with a motoring dyno driving a non firing engine with working cylinder heads but no pistons. When you change cams you have probably changed the angle of the grind on the cam. Sometimes this will affect closing velocities of the valves.
How much HP does a cam add to ls1?
One of the 224/230’s most obvious advantages over the stock camshaft was peak power, coming in at 463.2 hp at 6,300 rpm, a gain of 45.2 hp.
What is a good cam for a stock 350?
COMP Cams CL12-600-4 Camshaft For 350 Chevy – Best Top Pick Review. COMP Cams CL12-600-4 camshaft option is our top pick, and for good cause. With its many great features that will increase the performance of your 350 Chevy significantly, this choice will give you the most horsepower for the most cost-effective price.
How much HP can a ls1 make?
Even in emissions-legal trim, a blown LS1 will pump out over 500 wheel horsepower, with 800 wheel hp available for a serious stroker effort. With turbo motors, the sky is the limit, as 1,000 hp is a common occurrence, with the ability to adjust the power output by turning a simple boost knob.
How big of a cam can I put in a stock 350 vortec?
Unmodified heads w/stock retainers and seals will allow somewhere between 0.420″ and 0.470″ lift- but this has to be verified on a per head basis.